Nickel Alloy N09901 alloy901 Seamless Tubes Pipes Nickel Incoloy 901 Tubing piping

Nickel Alloy N09901 alloy901 Seamless Tubes Pipes Nickel Incoloy 901 Tubing piping

Key words

Nickel Alloy N09901 alloy901 pipes tubes,TINSI-STELL Nickel Alloy N09901 alloy901 tubing piping, TINSI-STELL Stainless steel Nickel Alloy N09901 alloy901 pipes tubes,stainless steel Nickel Alloy N09901 alloy901 tubing piping,TINSI-STELL Nickel Alloy N09901 alloy901 seamless tubes pipes,TINSI-STELL Nickel Alloy N09901 alloy901 seamless tubing piping,Nickel Alloy N09901 alloy901 industrial tubes pipes,Nickel Alloy N09901 alloy901 precision tubes pipes,Nickel Alloy N09901 alloy901 bright annealing tubes pipes,Nickel Alloy N09901 alloy901 capillary, TINSI-STELL ASTM A632 Nickel Alloy N09901 alloy901 capillary tubing, ASTM B163 B407 Nickel Alloy N09901 alloy901 tubes pipes,

Introduce：

A nickel-iron-chromium alloy containing titanium and aluminum for precipitation hardening and molybdenum for solid-solution strengthening. The alloy has high yield strength and creep resistance at temperatures to about 1110°F (600°C). A subtantial iron content enables the alloy to combine high strength with good forging characteristics. Used in gas turbines for discs and shafts. Standard products form is round.

Chemical-active water soluble lubricants or plain soluble oil and water or lubricants

Table1.Incoloy 901 Chemical composition:

Table2.Incoloy 901 Physical properties:

Table3. Temperature Incoloy 901 minimum mechanical properties in the room:

Corrosion Resistance Incoloy 901 UNS N09901：
Alloy 901 has good corrosion resistance to the atmospheres normally found in jet engine operations. It has slightly lower scaling resistance than such alloy as Types 309 and 310 stainless steel.
Hot Working Incoloy 901 UNS N09901：
Alloy 901 is forged between 2050°F (1121°C) and 1850°F (1010°C), metal temperature. Light hot work may be continued down to 1600°F (871°C) but not below. Metal temperature should not exceed 2050°F (1121°C) during rapid working. Billets should be charged into a hot furnace and heated rapidly through the precipitation hardeningrange.
Weldability Incoloy 901 UNS N09901：
Alloy 901 can be welded by the inert-gas-arc method. It is difficult to weld. All welding should be done in the solution treated condition. Cold worked parts should be re-solution treated before welding. A re-solution treatment is recommended after welding before stabilizing and aging.
Heat Treatment Incoloy 901 UNS N09901：
Solution Treatment
1975/2025°F (1080/1107°C), hold 2 hours at heat, and water quench.
Stabiliztion Treatment
1400/1475°F (760/802°C), hold 2 to 4 hrs, and air cool.
Precipitation Hardening Treatment
1300/1375°F (704/746°C), hold for 24 hours, and air cool.
Incoloy Alloy Specification:

ASME SB163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

ASME SB165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube

ASME SB167 Standard Specification for Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617),and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

ASME SB407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

ASME SB423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

ASME SB444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

ASME SB622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

ASME SB668 UNS N08028 Seamless Pipe and Tube

ASME SB690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

ASME SB729 Standard Specification for seamless UNS N08020, UNS N08026, and UNS N08024 nickel alloy pipe and Tube

At TINSI-STEEL Stainless Tubes, quality management begins way ahead of any production step.

From the selection of raw material suppliers up to the final quality tests in our own factory we thoroughly evaluate, test and control our products and processes, aiming at continuous improvements. For in process and acceptance inspection, the quality departments at the individual manufacturing centers have state of-the-art equipment at their disposal including mechanical workshops, tensile and impact testing machines, chemical laboratories for corrosion tests, equipment for hardness testing and metallographic inspection.We also have extensive facilities for non-destructive testing, including ultrasonic, eddy current, hydrostatic, positive mate- rial identification and dye penetrant testing.

If your company needs tubing, you can rely on TINSI company. Thanks to our precision engineered manufacturing procedures, we easily and effectively respond to our customers' requirements, no matter how stringent they may be. Innovations in processes allow us to continually expand the range of product solutions. TINSI-STEEL engineers closely follow each phase of production and testing to ensure nickel alloy seamless tubes pipes of superior performance.